UNISTEP TECHNOLOGIES
Wireless control modules for the industry, science, educators, and the hobbyists
Prices are in CAD -- A Currency Converter can be found at the bottom of the page.
   Home      Industrial Products      I/O Controllers
 
 

 ZCI - ZigBee Wireless I/O Control Board     


ZigBee Wireless Digital and Analog I/O Board with Powerful Built-in Functions.
The ZCI board is a ZigBee wireless remote control board intended for industrial control applications. It includes a powerful ASCII Command Interpreter with a wide selection of commands for digital and analog I/O, power management, automatic event monitoring, security, and system development assistance functions. Command interpreter is capable of processing commands both from the ZigBee network and the USB ports simultaneously.
  • 26 General Purpose I/O channels, 20 of which are 10-Bit Analog input-capable
  • 4 independent DAC output lines with 10-bit resolution
  • 5 PWM generators and 4 pulse generators, all individually programmable
  • Powerful command set and ASCII command interpreter with over 70 commands
  • Remote management features such as firmware upgrade, system reset and configuration
  • Adjustable RF power output settings
  • Network Security and application development functions
  • Indicator and status LEDs
  • Non-volatile configuration storage on Flash EEPROM
  • Windows Control Panel application program for configuration, testing, and experimentation
  • Fully supports ZigBee 2007 / ZigBee Pro wireless connectivity up to 64 K nodes
  • Antenna and USB port connector options:
    • Chip Antenna + USB-B Connector  (ZCI-CB-Bxx)
    • Chip Antenna + USB Mini-B Connector  (ZCI-CM-Bxx)
    • Reverse SMA Antenna Connector + USB-B Connector  (ZCI-SB-Bxx)
    • Reverse SMA Antenna Connector + USB Mini-B Connector  (ZCI-SM-Bxx)
    • U.FL. Antenna Connector + USB-B Connector  (ZCI-UB-Bxx)
    • U.FL. Antenna Connector + USB Mini-B Connector  (ZCI-UM-Bxx)
    • Lab Module with Acrylic Chasis + Chip Antenna + USB-B Connector  (ZCI-CB-Lxx)
Not all options are stocked. Please check for availability.
Data Sheet  User Manual  Accessory Boards  |  Product Page

 TDB - TCP/IP Digital I/O Board  (Elexol EtherIO24TCP)     


24 Channels of Digital I/O on TCP/IP and Ethernet Networks
The TDB board (Elexol Ether I/O 24 TCP) is a versatile platform for controlling external circuits and devices through any TCP/IP network. The board provides 24 individually programmable I/O channels for digital I/O, and is capable of wireless operation with a wireless network router. It comes complete with a host interface application program and a full Windows API (Application Program Interface) for programming in VB or VC++.
  • Supports TCP and UDP Commands, ARP, BOOTP, DHCP, ICMP, HTTP
  • SPI and I2C Interface on all three Ports
  • Power-up Settings are stored on-board for easy configuration
  • Programmable Fixed IP or Dynamic IP assignment from a DHCP server
  • Easy connection to the I/O port via a 10-way box header that suits a standard IDC connector
  • Advanced configuration allows the modules to automatically scan the input ports and transmit changes directly to any host or another Ether IO24 module without host connection 
  • Configuration and control of all setting is achieved using the on-board Web-based Java Application
 A number of accessory products from Unistep are specifically designed to work with the TDB board and enhance its capabilities. Unique MAC address assigned to each board makes it possible to have multiple boards on the same network.
 
 
 

 EDB - Ethernet Digital I/O Board  (Elexol EtherIO24)    


24 Channels of Digital I/O on Ethernet Networks
The TDB board (Elexol Ether I/O 24 R) is a versatile platform for controlling external circuits and devices through an Ethernet network. The board provides 24 individually programmable I/O channels for digital I/O, and is capable of wireless operation with a wireless network router. It comes complete with a host interface application program and a full Windows API (Application Program Interface) for programming in VB or VC++.
 
The module connects to any Ethernet network supporting the TCP/IP protocol suite and can communicate with any point on that network. By connection with an Internet Router the device can communicate with any Internet connected device A number of accessory products from Unistep are specifically designed to work with the EDB board and enhance its capabilities. Unique MAC address assigned to each board makes it possible to have multiple boards on the same network.
 

 UDB - USB Digital I/O Board  (Elexol USB I/O 24)   

24 Channels of Digital I/O on the USB Bus
 
The UDB board is a versatile platform for controlling external circuits and devices through the USB ports. The board provides 24 individually programmable digital I/O channels for digital I/O, and is capable of fast USB transfers. It comes complete with a host interface application program and a full Windows API (Application Program Interface) for programming in VB or VC++.
 
The module features 24 5V level signal lines individually programmable as input or output.   As the module connects to the USB port, multiple modules can be connected to a single PC by the use of a USB hub or hubs.   Each module features a serial number and the PC can identify each module uniquely allowing for multiple modules to be connected for a single application.   The outputs of the module are able to source or sink up to 30mA per I/O, up to a maximum 50mA per port, to allow for direct connection to a variety of devices
 
More Info...  | Data SheetAccessory Boards

 USM - USB Serial I/O Module   

USB Connectivity for Legacy Designs and Prototype Circuits
 
USM Module is a small (2.0" x 1.0") USB-to-Serial converter module with big features. It can be used to bring USB connectivity wherever a serial I/O connection needs to be brought into a PC.
  • Selectable 5.0v or 3.3V logic level for all data and handshake signals
  • Full complement of serial communication handshake signals on 0.1" header pins
  • Two general-purpose user control signals also available on the header connector
  • Based on the FT232R USB UART Controller from FTDI
  • Drivers for all current versions of the Windows and Apple operating systems
  • Data signals and positive power rail brought on to connector on top for convenience
  • Power, TxData and RxData LED indicators
  • RxData-TxData loopback feature for ease of functional testing 
  • Choice of USB-B or USB Mini-B socket connectors
  • USB 2.0 Full Speed compatible
  • Serial data Rates from 300 BAUD to 3000 BAUD



Please contact us if you wish to order more than qty 10 of any single item.
    Copyright (c) 2011 Unistep Technologies